They may be familiar to some, but not every gunsmith knows the ins and outs of drill bits. Here are the basics.

The graceful, light, and distinctive L.C. Smith Hammerless Double sidelock is a favorite of American shotgunners. Here’s how to fix its most common problems. If you own a Smith and want to make it suitable to shoot again, or if you are presented a Smith to repair, here’s what you need to know about the shotgun.

In June 2010, Kahr Arms purchased Minnesota-based firearms manufacturer, Magnum Research, Inc., maker of the Desert Eagle Pistol and BFR Revolvers in .44 Magnum, .45 LC/.410 or .45/70. Kahr Arms offers a selection of other niche-type firearms, such as the “Tommy Gun” and Auto-Ordnance line of M1 .30 caliber carbines. In this video, Gun Tests Contributing Editor Roger Eckstine shows off two of the company’s big-hole BFR wheelguns.

Beretta USA introduced the BU-9 Nano as its entry into the pocket 9mm pistol category last September. Initial shipments of the American-made pistol left the Accokeek, Maryland factory beginning in November 2011, with a suggested retail price of $475. In this video, Gun Tests’ Contributing Editor Roger Eckstine gets a detailed explanation of how easy the Nano is to break down for maintenance. The Nano's modularity provides for simple disassembly and easy cleaning. Safely disassemble the pistol by first engaging the striker deactivator, a patent pending safety mechanism that eliminates the need to pull the trigger prior to disassembly.

Robar SR 90 .308 Winchester

Courtesy Gun Tests

Our recommendation: On average, with both Winchester and Federal Gold Medal match, the Robar could be relied on to put all of its shots from a slightly fouled barrel into half an inch or less. If you’re a professional law enforcement or military officer with long-range accuracy needs—or a consumer who loves precision riflework—this gun is worth examining.

Easily the most attractive of the bunch, the $5,200 Robar SR 90 rifle (as equipped, including excise tax, hard carrying case, bipod, and a special price on the scope) had a quick-detachable $375 Parker Hale (English) bipod that is a mighty nice piece in itself. The bipod had quick-extendible legs that could be instantly folded. We liked the bipod for resting the rifle on the ground.

The .308-chambered SR 90 also had a detachable front sling block (which also held the bipod attach point) affixed into a channel under the forend. This permitted quick adjustments for the support-hand position when using a target-type rifle sling. We removed the bipod and sling attach point for our accuracy testing, so they wouldn’t interfere with our machine rest.

The 13.9-pound Robar (add 1.5 pounds for the bipod) was fitted with a fluted Lilja barrel. The rifle arrived at Gun Tests without the barrel having been broken in. The superb instruction manual that accompanied the rifle (see sidebar) gave detailed instructions how to break-in the barrel, and we followed the text religiously. This required 30 rounds. The manual also required the shooter to clean the barrel after no more than five shots, following the break-in period, and again we did just that. However, we found that placement of the first shot was not the same as the following four shots in our five-shot groups.

The metal of the SR 90 was finished in Robar’s proprietary dull black RoGuard. The bolt, magazine follower, floorplate release button, and many of the inner parts were finished in Robar’s Teflon-enhanced NP3 formula, an off-white electroless nickel finish. The bolt was extremely slick in the action, and anything plated in NP3 will never rust. The bolt lugs appeared to have full contact on their rear surfaces, as did

Courtesy, Gun Tests

Robar used a Lilja fluted barrel on the SR 90. Fluting is said to permit the barrel to cool more quickly. We found it got hot very quickly on the outer surface.

The stock was painted dull black and nicely complemented the appearance of the metal work. The trigger pull was exceptionally clean, and broke at 2.5 pounds. The barrel was free-floated for its entire length. There was an enormous gap between the barrel and the wide, rounded forend, which gives more room for air to circulate around the flutes to help cool the barrel. The buttplate was adjustable for position, and had a thin black rubber recoil pad. As on the other two rifles, the adjustable cheek rest was locked in place by screws that could be installed from either side, making the rifle a bit easier to use by lefties.

The workmanship throughout the Robar rifle was absolutely first cabin. There were no shortcuts apparent anywhere. Even if this gun shot poorly—which it didn’t—we’d be proud to own it. The rifle performed perfectly in every respect.

Accuracy, of course, is what this rifle intends to deliver, and we found that it did its job well. Any good match ammunition performed admirably in the Robar rifle. We got the best results with Winchester Supreme ammunition, loaded with the Nosler 168-grain boattail match bullet. On one target four shots (after the fouler) went into 0.19 inch. To our disbelief, the Federal match ammunition gave a standard deviation of 5 fps in the Lilja barrel. We tried it again, and it again gave only 5 fps SD, with the average velocity only 2 fps different. It did not shoot that consistently in the Autauga.

Reader Comments

Even though this is a nice weapon, it is way over priced for the package.

Comment by: ROB F | April 23, 2009

$5,200.00?!?!? Please.

Comment by: KURT L. H | April 23, 2009

$5200, and that was ten years ago!

Comment by: RackEmPunk | April 23, 2009

May be a great and beautiful gun but that is mucho bucks for most of us. I can drill prairie dogs at 250 yds+++. all day long with my Ruger #1 in .223, Ruger MK II mod 77 in .223 & .204 Ruger with Sightron 6x24 scopes and I have less than $1,200.00 each invested. Can't see the need for these high dollar rifles for most of us unless you are shooting for money in match tourneys.

Comment by: Mystic Rebel | April 23, 2009

I can have a kimber adv. tactical that is twice the gun for about 2000.00 less. I can fowl the barrel and still be hole in the hole.

Comment by: ROB F | April 23, 2009