They may be familiar to some, but not every gunsmith knows the ins and outs of drill bits. Here are the basics.

The graceful, light, and distinctive L.C. Smith Hammerless Double sidelock is a favorite of American shotgunners. Here’s how to fix its most common problems. If you own a Smith and want to make it suitable to shoot again, or if you are presented a Smith to repair, here’s what you need to know about the shotgun.

In June 2010, Kahr Arms purchased Minnesota-based firearms manufacturer, Magnum Research, Inc., maker of the Desert Eagle Pistol and BFR Revolvers in .44 Magnum, .45 LC/.410 or .45/70. Kahr Arms offers a selection of other niche-type firearms, such as the “Tommy Gun” and Auto-Ordnance line of M1 .30 caliber carbines. In this video, Gun Tests Contributing Editor Roger Eckstine shows off two of the company’s big-hole BFR wheelguns.

Beretta USA introduced the BU-9 Nano as its entry into the pocket 9mm pistol category last September. Initial shipments of the American-made pistol left the Accokeek, Maryland factory beginning in November 2011, with a suggested retail price of $475. In this video, Gun Tests’ Contributing Editor Roger Eckstine gets a detailed explanation of how easy the Nano is to break down for maintenance. The Nano's modularity provides for simple disassembly and easy cleaning. Safely disassemble the pistol by first engaging the striker deactivator, a patent pending safety mechanism that eliminates the need to pull the trigger prior to disassembly.

Gun Reports - Special Reports

One successful technique is the “rule of thirds” where the focal point (where you first clearly see the clay after it leaves the arm of the trap); the hold point (the spot where you point your shotgun on the target path ready to swing through the target); and the break point (where you shoot at the target) are equally spaced in your shooting procedure.

Becoming A Master of Rascally Rabbits

No target on a sporting clays course requires more concentration and focus than those sometimes unpredictable and often frustrating rabbits.

Bouncing bunnies have been known to leap in the air, zip across the terrain, hop, skip, jump or even bounce backwards – rarely in a predictable pattern.

Because the targets are flatter and thicker than standard clays in order to withstand rolling on the ground without shattering, the clays often require a little harder hit before shooters can prove they are masters of “rascally rabbits.”

Just poking holes in the rabbit, rather than breaking it into pieces, doesn’t help your score. Even if the target path is up close and personal, No. 7 1/2 shot will normally produce more breaks than No. 8 or 9 shot.

With the proper shells in your pouch, the next step is to work on proper gun movement.

Unlike most sporting clays shots where more lead is a good thing, many shooters being bamboozled by bouncing bunnies are actually giving the clays too much respect and are shooting in front of their target.

Rabbit targets, unless the throwing arm is really cranked up and your shooting window is very limited, really start slowing down as they roll across the ground.

Misses in front are normally the result of not staying focused on the target or overestimating the speed of the rabbit.

Before you take your first shot, carefully scan the target path and then pick your most comfortable break point. Move your focus back to the spot where you can first clearly see the rabbit target after it leaves the arm of the trap and you are ready to get started.

One successful technique is the “rule of thirds” where the focal point (where you first clearly see the clay after it

Centering your pattern on the clay, rather than hoping to catch it with the edge of a wider spread, will normally produce better bunny busting results.

To help a shooter visualize the rule of thirds, one shooting instructor places three empty shotgun shells equally spaced on the shooting stand in front of his student.

“The first shell represents where you first clearly see the target, the second is where you insert the barrels on the target and the third is where you pull the trigger and break the target. It’s just one, two, three.’’

If you maintain focus on the rabbit – just in case the clay takes one of those unexpected hops – and shoot right at the front edge of the target as you move through it, bouncing bunnies will lose a lot of their intimidation factor.

One final rabbit reminder – in most cases if you are choking up (with your shotgun and not in your throat) you stand a better chance of making a good hit on the target.

Some shooters make the mistake of using a skeet or cylinder choke on very close rabbit targets when an improved cylinder or light modified will provide the denser pattern needed to break the thick targets.

Centering your pattern on the clay, rather than hoping to catch it with the edge of a wider spread, will normally produce better bunny busting results.